Seeing iron in pool water is something no homeowner wants to deal with. However, using the right product, removing iron from pool water can be very easy and leave little for the owner to do. The best product for removing iron from water is Ferri-Iron tablets.

These tablets just need to be added to pool water where they will then discolor any part that has been discolored by iron, manganese, or any other mineral. After the stain has been decolorized, it will be removed by the filter, as well as by charge neutralization and flocculation. Ferri-Iron tablets are extremely safe as they do not contain toxic ingredients, as some other iron removal products do. They also contain no caustic materials or chemicals that will corrode your pool’s metal or liner. Ferri-Iron tablets are also free of diatomaceous earth, alum and any other chemicals; they are also completely soluble in water.

One of the best things about Ferri-Iron tablets, which makes them different from any other iron removal product, is that they do not affect the pH or chlorine levels in swimming pools. With other products, you usually need to reduce both levels, as the product will interfere with them and could cause you other bigger problems, such as metal corroding in and around the pool and its parts. However, because Ferri-Iron tablets work so closely with your pool filter, it’s important to make sure your filter is turned on and in proper working order.

Ferri-Iron tablets should be added to the skimmer baskets in the pool, approximately 1 tablet per 3,000 gallons of pool water. When the pool is very large and there are several baskets, the tablets must be distributed evenly throughout all the baskets. The tablets should be added over a period of several hours, with the filter on at all times. Once all the tablets have been used in the water, the filter should be backwashed within 18-24 hours of the final treatment.

When there is a large presence of iron in the water, additional treatments with Ferri-Iron tablets may be required. In these cases, the filter will need to be backwashed within 24 to 48 hours of treatment.

Seeing green pool water caused by excess iron can be very alarming for pool owners. But with Ferri-Iron tablets, it doesn’t have to be that way. Drop in a few tablets, wait for them to do their job, and then wait until your pool is clean and ready to swim again. Ferri-Iron Truly Tablets are A homeowner’s best friend!